Demo modeAll data is fictional for demonstration only. Back to Safora · Sign in for full access
Safora
Sign in
Focused inspection

Breaking Ground / HSG47

Tied to the project selected in the workspace header. Change it there if you need a different site.

Checklist
  1. Are the latest utility drawings and survey information available, legible, and understood by the work team?
  2. Have all underground services within the work area been identified and clearly marked on site?
  3. Are trial holes completed, recorded, and kept up to date for the excavation area?
  4. Is a valid Permit to Excavate in place and understood by the workforce?
  5. Are appropriate RAMS and HSG47 procedures available on site and briefed to operatives?
  6. Is a competent service coordinator / supervisor appointed and available?
  7. Are CAT & Genny operators trained, competent, and using calibrated equipment?
  8. Is CAT & Genny equipment being used correctly and throughout excavation activities?
  9. Are safe excavation techniques being used, including hand digging near known services?
  10. Are exposed services adequately protected, supported, and clearly identified?
  11. Are excavation markings, warning systems, and service identification methods being maintained throughout the works?
  12. Are appropriate excavation methods being used where required, including vacuum or air excavation techniques?
  13. Are newly installed or exposed services recorded and protected appropriately?
  14. Are operatives involved in excavation activities carrying the required excavation safety information or permits?